電纜夾由夾體、彈簧、銷軸和開關銷等組成，夾體的H型上下內側各開有一個導向槽，在導向槽的兩端開有上下對應的4個方孔，夾體的一側是兩個并行的聯接板，另一側有一個聯接板，在每個聯接板上都開有相同孔徑的圓孔。它的夾體采用了以鋼板為骨架，表面溶注尼龍材料制成，外形則為中心牽引式不對稱的H型結構。電纜夾固定電纜與水管的銅鐘 一次性止血帶 標志樁模具 鋼絲輪 流水槽模具 防撞墻模具 檢查井鋼模具 不銹鋼鑄件 模鍛件方法是采用彈簧卡鎖固定方式實現的。本實用新型適用面廣，可在高檔普采與綜采上使用。
Cable clamp is composed of clamp, spring, pin and switch pin. There is a guide groove in the upper and lower sides of the H-shaped clamp. There are four square holes corresponding to the upper and lower sides of the guide groove. One side of the clamp is two parallel connection boards, and the other side is a connection board. There are circular holes with the same aperture in each connection board. The clamp body is made of steel plate and nylon. The shape of the clamp body is an asymmetrical H-shaped structure with central traction. The method of fixing cable and water pipe by cable clamp is realized by spring clamp. The utility model has wide applicability and can be used in high-grade general mining and fully mechanized mining.